[sensor]
sensor_cfg = "./Resource/VIC/0/imx662_1920x1080_ch0.cfg"
fusion_cfg = "./Resource/VIC/1/imx662_1920x1080_ch1.cfg"
autoscene_config = "./Resource/AutoScene/autoscene_conf.cfg"
fec_calibrate_path = "./ini/fec_calibrate.ini"
fec_conf_path = "./ini/fec_conf.ini"
fec_mode = 4                # 0: Original, 1: 1 Region, 2: 180 all direction, 3: 180 one Direction, 4: 180 two direction, 5: PT Mode
initial_fec_app_type = 0    # 0: ceiling, 1: table, 2: wall
eis_enable = 1

[nnm]
ModelPath = "nef/STDC04012026_models_630.nef"
ModelId = 32769               # KNERON_YOLOV5S_COCO80_640_640_3 (YOLO v5s)
JobId = 200                  # KDP2_INF_ID_APP_YOLO
InferenceStream = 1         # Inference stream index (use stream1: 640x640)
Threshold = 0.5             # for yolo only(JobId = 11)
Fps = 25                    # Image input fps for NPU inference
GetImageBufMode = 0         # 0: block mode 1: non-block mode
RoiEnable = 0               # Enable ROI for nnm detect
RoiX = 0                    # ROI start x
RoiY = 0                    # ROI start y
DrawBoxEnable = 1           # draw object bounding box on stream0 (also enables STDC seg overlay)
OnlyPerson = 1              # only draw person bounding box when DrawBoxEnable
                            #(so far for yolo only, JobId = 11)
DrawOnResize = 0;           # If InferenceStream is 0. This setting needs to be enabled. The box will be drawn on all resize streams.
verbose_log = 0             # 0: quiet (warnings only, ~30B/s), 1: per-frame class ratios every 20 frames (~1KB/s). Toggle from web UI.

NnmSource = 0                  # 0: run host_stream independently, 1: run with streamer
ssm_name = "vsrc_ssm_ifp_0"  # If NnmSource is 1. This setting needs to be set. The name is automaticlly create by streamer.

[voc]
voc_enable = 1              #enable Video Output Component
VocWidth = 1920             #video output width
VocHeight = 1080            #video output height
PixFmt = NV12               # HDMI input format for VOC: NV12 / NV21 / YM12

[streamer]
StreamCount = 2             #Stream amount
MemType = 0                 #Encode buffer type, 0(SRB mode)/1(SCM mode)

#stream0 is the main stream which has the same resolution as the sensor.
[stream0]
Codec = 0                   #VMF_VENC_CODEC_TYPE_H264
Width = 1920                #The image width of stream0
Height = 1080               #The image height of stream0
FPS = 25                    #The frame rate of stream0
QP = 25                     #The base value of the quantization parameter. Its range is from 0 to 51.
Bitrate = 2000000           #The average bitrate of the encoded stream. Its range is from 30,000 to 700,000,000 bps.
PIQ = 0                     #PIQ setting. Reduce the difference of QP between intra and inter frame. Default: 0 (disable).
GOP = 50                    #Group of pictures. It specifies the number of frames between two intra frames. The maximum GOP value is 600.
Virt_I_Interval = 0         #Virtual intra frame interval. 0:disable, range: 1 ~ (gop-1)
KeepFrameRatio = 0          # This option is valid only on resized stream.
EncodeBufferSize = 6291456  # 6M: 6*1024*1024 = 6291456
EncodeBufferAmount = 3      # (SRB only)

[stream1]
Codec = 0                   #VMF_VENC_CODEC_TYPE_H264
Width = 724                 #The image width of stream1 (STDC model training resolution)
Height = 362                #The image height of stream1 (STDC model training resolution)
FPS = 25                    #The frame rate of stream0
QP = 25                     #The base value of the quantization parameter. Its range is from 0 to 51.
Bitrate = 2000000           #The average bitrate of the encoded stream. Its range is from 30,000 to 700,000,000 bps.
PIQ = 0                     #PIQ setting. Reduce the difference of QP between intra and inter frame. Default: 0 (disable).
GOP = 50                    #Group of pictures. It specifies the number of frames between two intra frames. The maximum GOP value is 600.
Virt_I_Interval = 0         #Virtual intra frame interval. 0:disable, range: 1 ~ (gop-1)
KeepFrameRatio = 0          # This option is valid only on resized stream.
EncodeBufferSize = 2097152  # 2M: 2*1024*1024 = 2097152
EncodeBufferAmount = 3      # (SRB only)

[stream2]
Codec = 0                   #VMF_VENC_CODEC_TYPE_H264
Width = 640                 #The image width of stream0
Height = 480                #The image height of stream0
FPS = 25                    #The frame rate of stream0
QP = 25                     #The base value of the quantization parameter. Its range is from 0 to 51.
Bitrate = 2000000           #The average bitrate of the encoded stream. Its range is from 30,000 to 700,000,000 bps.
PIQ = 0                     #PIQ setting. Reduce the difference of QP between intra and inter frame. Default: 0 (disable).
GOP = 50                    #Group of pictures. It specifies the number of frames between two intra frames. The maximum GOP value is 600.
Virt_I_Interval = 0         #Virtual intra frame interval. 0:disable, range: 1 ~ (gop-1)
KeepFrameRatio = 0          # This option is valid only on resized stream.
EncodeBufferSize = 2097152  # 2M: 2*1024*1024 = 2097152
EncodeBufferAmount = 3      # (SRB only)

[capture]
# Legacy single-JPEG capture (kept for reference, not used by event_recorder)
enable = 0
http_url = http://192.168.0.114:8081/api/upload
cooldown_ms = 1000

[event]
# Violation event recorder — two-channel: JSON (BT/iPad) + tar.gz (Allxon OOB)
enable = 1
bt_uart_dev     = /dev/ttyS1                             # Channel A: UART device for DX-BT24 BLE module → iPad
bt_at_probe     = 0                                      # 0: skip AT commands (normal); 1: one-time baud upgrade (factory/reset only)
upload_url      = http://192.168.0.114:8081/api/golf.cgi # Channel B: tar.gz upload (OOB/cloud path)
                                                         #   Production: http://192.168.0.99/api/golf.cgi
sd_path         = /tmp/sdcard/events                     # SD card event archive path
sd_max_mb       = 7168                                   # 7 GB — delete oldest when exceeded
upload_delay_ms = 0                                      # 0: upload immediately after tar.gz built (tar is built after event ends, no extra delay needed)